|
| 「點圖可放大預覽」 |
輸送帶式研掃機(MY-800)
CONVEYING BELT TYPE SHOT BLASTING M/C
本機利用橡膠輸送帶輸送工件，輸送帶轉動而將工件直通穿過噴洗隧道，噴洗工件時，乃由設置於由各部位之噴砂葉輪，將鋼珠或鋁珠以高速且連續不斷射出無死角珠擊工件表面，使附著在工件表面之鑄砂或鏽皮脫落，作業後之工件表面美觀清潔，便於下一步驟之處理程序。
本機適於鐵板、玻璃、型鋼、鋅鋁壓鑄品之單面噴洗。
This m/c is employed rubber belt to conver the workpiece and the rolling rubber belt will convey the workpiece pass through the shot-blasting tunnel, Meanwhile, the workpiece surface will be shoted steel ball by shot wheelabrators in hi-speed and continuously, after then, then asting sand, scaling & burring etc., which adhesived on the workpiece surface will becleaned, The processed workpiece will be scaling & burring etc., which adhesived on the workpiece surface will be cleaned, The processed workpiece will be shined & burnished and convenient for next step pocessings.
This m/c is suitable for steel plate, glass, l beam, zinc & aluminiumdie die castings etc., to make single surface shot blasting processings.
本機型規格一覽表：
| 型式 Model | MY-800 | |
| 研掃動力 Shoting power | 7.5HP*4 / 10HP*4 | |
| 最大工件長度 Max.working length | 6000mm | |
| 有效處理寬度 Eff.handing width | 800mm | |
| 最大工件高度 Max.load height | 500mm | |
| 螺旋動力 Helical collecting power | 2HP*2 | |
| 輸送動力 Working table drinving power | 2HP | |
| 提砂動力 Elevating shot power | 2HP | |
| 集塵動力 Dust collector power | 7.5HP | |
| 佔地面積 Used floor space (LXW) | 24M2 | |
| 凈重 N.W. | 7000kg | |
影片介紹:
